H-Sphere VPS Versions


Updating H-Sphere VPS To 1.5-9

(H-Sphere 2.5 and up)

08 Jan 2008

Features   |   Install


This document is the step-by-step instruction of adding a VPS hosting box into an H-Sphere cluster by means of H-Sphere update script in H-Sphere 2.5 and up.

For H-Sphere under 2.5 or non H-Sphere boxes update VPS server manually.

Important!
These instructions are valid only for H-Sphere 2.5 Patch 4 and up. For lower versions, perform steps described here.

For more information on VPS, please contact vps@psoft.net.

 

Step 1. Suspend Virtual Servers on the VPS Host

Login as root on the VPS host server and run:

# cd /hsphere/shared/scripts
# ./vps-suspend.pl -a

 

Step 2. Run H-Sphere Updater on the VPS Box

Please refer to H-Sphere Updater and Adding Servers and Services in H-Sphere 2.5 and up.

Note: This procedure will install the following core VPS related packages on the VPS host server:

  • FreeVPS kernel: freevps-1.5-9
  • FreeVPS tools: freevps-tools-1.4-9
  • H-Sphere VPS: hsphere-vps-1.5-9.noarch

The packages may vary depending upon the operating system. For a full list of VPS related packages installed on VPS box, please refer to VPS Server per supported operating systems in H-Sphere 2.5+ package list.

 

Step 3. Edit Boot Loader Configuration File

Edit this file (/boot/grub/grub.conf, or /etc/lilo.conf) so its default variable is set to take newly installed kernel as the boot image.

Important! Keep the old kernel image settings, so the system can start if anything goes wrong with the new kernel installation.

  • grub.conf
    default=0
    timeout=10
    splashimage=(hd0,0)/grub/splash.xpm.gz
    title Red Hat Linux (2.4.21-freevps-1.5-9)
      root (hd0,0)
      kernel /vmlinuz-2.4.21-freevps-1.5-9 ro root=/dev/sda5
      initrd /initrd-2.4.21-freevps-1.5-9.img
    title Red Hat Linux (2.4.18-3)
      root (hd0,0)
      kernel /vmlinuz-2.4.18-3 ro root=/dev/sda5
      initrd /initrd-2.4.18-3.img
    
  • lilo.conf
    prompt
    timeout=50
    default=linux_patched
    boot=/dev/sda
    map=/boot/map
    install=/boot/boot.b
    message=/boot/message
    linear
    
    image=/boot/vmlinuz-2.4.18-3
        label=linux
        initrd=/boot/initrd-2.4.18-3.img
        read-only
        root=/dev/sda5
    
    image=/boot/vmlinuz-2.4.21-freevps-1.5-9 
        label=linux_patched
        initrd=/boot/initrd-2.4.21-freevps-1.5-9.img
        read-only
        root=/dev/sda5
    

Now apply changes to lilo.conf (skip this step if you use grub boot loader):

# lilo

If you correctly edit lilo.conf, the command will list all labels' values as added.

 

Step 4. Reboot the Server

Run:

# shutdown -r now

 

Step 5. Check Kernel Version

Run:

# uname -a

If the procedure has been performed correctly, this command will return a line with parameters of the server which must include 1.5-9.

 

Step 6. Run the Update Script

Run:

# cd /hsphere/shared/scripts/
# ./vps-update.pl

and follow the script instructions.

 

Step 7. VPS Host Configuration

To configure your virtual servers, run the configuration script:

# /hsphere/shared/scripts/vps-configure.pl

With the further steps, you'll perform basic configuration of your virtual servers. See more on VPS host configuration.

 

Step 8. Resume Virtual Servers on the VPS Host

Run:

# cd /hsphere/shared/scripts
# ./vps-resume.pl -a

 

Step 9. Configure Network Gateways

Follow insructions on adding VPS network gateways.





See Also:

FreeVPS
H-Sphere Versions
H-Sphere Documentation
H-Sphere VPS (Sysadmin Guide)
H-Sphere VPS (Admin Guide)
H-Sphere VPS (User Guide)
   
Request VPS Installation



Copyright 1998-2017. Positive Software Corporation.
All rights reserved.