Parallels H-Sphere Documentation System Administrator Guide

 

RealServer Installation for Unix

 

Last modified: 27 Dec 2007

 

WARNING: This documentation covers Parallels H-Sphere versions up to 3.1. For the latest up-to-date Parallels H-Sphere documentation, please proceed to the official Parallels site.

H-Sphere supports all versions of RealServer that have ISPHosting support. If your license doesn't support ISPHosting, contact your RealServer account representative to obtain a license key that has the same number of streams and properly enables ISP hosting.

RealServer can be installed on a web box or a separate box with apache.

Installation Procedure

  1. Install RealServer with ISPHosting support on a web box or a separate box into /hsphere/shared/RealServer as instructed by RealServer documentation. If you set it up on a web box, specify 8080 port instead of the default 80, which is used by apache. During the installation, note the following data, as you will need them on subsequent steps:
    - RealServer IP
    - RealServer Admin Port
    - Administrator Login
    - Administrator Password
  2. Add the following line to the RealServer crontab:
    0 7 * * * nice -15 /hsphere/shared/scripts/cron/rmserver_analyze.pl
  3. Launch RealServer with the following command:
    /hsphere/shared/RealServer/Bin/rmserver rmserver.cfg &
  4. Log into your RealServer interface using administrator login and password. To get there, type this URL in address field of your browser:
    http://RS_IP:ADMIN_PORT/admin/index.html
    replacing RS_IP and ADMIN_PORT with the RealServer IP and admin port you were given during the installation.
  5. In the left menu, select Server Setup -> Mount Points.
  6. In the form that appears, add mount point /shiva/ -> /hsphere/local/home :
  7. Click Apply. The status window will open:
    Close this window.
  8. Click Restart Server in the upper right corner of the browser window to restart RealServer:
  9. Select Content Management -> ISP Hosting in the left menu:
  10. In the ISP Hosting form, add the following settings:
    Translation Mounts: user
    User List File Name: /hsphere/local/config/RealServer/user.list
    Description: users
    Mount Point: /shiva/
    User Path: /shiva/
  11. Click Apply. The status window will open:
    Close this window.
  12. Click About in the upper left corner of the browser window:
    You will get a window with information about your license.
  13. Go to the admin control panel and add the box to H-Sphere.
  14. Now you can proceed to RealServer settings that are not related to H-Sphere.


© Copyright 2017. Parallels Holdings. All rights reserved.